雙組份打膠機重要的零部件膠槍的使用
雙組份打膠機重要的零部件膠槍實際上是一種打膠（或擠膠）的工具，需要施膠的地方就有可能會用到，廣泛用于建筑裝飾，電子電器，汽車及汽車部件，船舶及集裝箱等行業。下面來講講它的使用吧。
The glue gun, an important part of the two-component glue dispenser, is actually a tool for glue application (or extrusion). It may be used where glue application is needed. It is widely used in building decoration, electronic appliances, automobile and auto parts, ships and containers and other industries. Let's talk about its use.
通常打膠槍是通過對膠槍施加壓力，主動軸向前推而使膠漿被擠出來完成施工過程，如果您是選擇薄瓶系列的產品，而薄瓶在打膠過程中瓶身會因受到壓力而產生一定的膨脹。
Generally, the glue gun is used to apply pressure to the glue gun, and the driving shaft is pushed forward to extrude the glue to complete the construction process. If you choose thin bottle products, the bottle body will expand due to pressure during the glue injection process.
如在使用過程中只停止對膠槍的壓力，此時薄瓶由原來的膨脹收縮復原，加上膠槍“主動軸”的慣性還有向前的推力，即使打膠槍停止施加壓力，膠嘴的膠還會繼續外流一點，這樣會給施工者帶來不便，更會影響施工質量。
If only the pressure on the glue gun is stopped in the process of use, the thin bottle will recover from the original expansion and contraction, plus the inertia of the "driving shaft" of the glue gun and the forward thrust, even if the glue gun stops applying pressure, the glue in the glue nozzle will continue to flow out a little, which will bring inconvenience to the constructor and affect the construction quality.
正確使用方法是在使用時，因施工需要停止打膠時，應該馬上用手快速按一下膠槍彈簧部位的鐵片（通常我們用打膠槍那只手的大拇指輕按一下即可），這樣可把“主動軸”向前的慣性減為零，因底蓋停止受壓，膠瓶膨脹收縮復原的壓力，會使底蓋向后稍退，這樣就會大大減少膠漿外流的機會。
The correct method is to quickly press the iron sheet at the spring of the glue gun with your hand (usually we can use the thumb of the glue gun to gently press it) when the glue application is stopped due to construction needs during use, so that the forward inertia of the "driving shaft" can be reduced to zero. Since the bottom cover stops pressing, the pressure of the rubber bottle to expand, contract and recover will make the bottom cover back slightly, which will greatly reduce the chances of glue outflow.
使用注意事項：
Precautions:
1．與膠槍連接的壓縮空氣壓力不能超過145p.s.i（10bar）
1. The pressure of compressed air connected to the glue gun shall not exceed 145p.s.i (10bar)
2．拆卸膠槍前一定不要接上壓縮空氣。
2. Do not connect compressed air before disassembling the glue gun.
3．為確保膠槍可靠地工作，使用后一定要按照密封劑生產商的溶劑殘膠（不允許將膠槍浸泡在溶劑中）。
3. To ensure the reliable operation of the glue gun, the residual glue must be removed according to the solvent recommended by the sealant manufacturer after use (it is not allowed to immerse the glue gun in the solvent).
4．如果空氣從扳機閥處緩慢逸出，排氣閥會明顯失效，如果出現此種情形，應該更換消音排氣閥里面的隔膜片。
4. If the air slowly escapes from the trigger valve, the exhaust valve will obviously fail. If this happens, the diaphragm in the silencing exhaust valve should be replaced.
5．使用時，前蓋一定要旋緊。
5. When using, the front cover must be tightened.
6．使用所有氣動工具時建議佩帶護目鏡。
6. It is recommended to wear goggles when using all pneumatic tools.
在使用雙組份打膠機膠槍前一定要做好功課，了解透徹該怎么使用，在使用時也要格外注意，把握好方法，盡量減少浪費，把硅酮膠的作用發揮到更好。更多相關的事項就來我們網站
http://m.bjbxr120.com進行咨詢！
Before using the glue gun of the two-component glue dispenser, you must do your homework well, understand how to use it thoroughly, pay special attention to it when using it, grasp the method, reduce waste as much as possible, and play a better role of silicone glue. More related matters come to our website http://m.bjbxr120.com Consult!
上一篇：必不可少的打膠機使用過程中關注兩點
下一篇：雙組份打膠機的運用情況分幾方面看
